![]() |
![]() |
![]() |
|||||||||||||||||||||||||||||||||||||
|
![]() |
![]() |
![]() |
#3 | ||||||
|
![]()
Put a dot with an indelible magic marker at each end of the crack and go out and shoot a round of skeet with normal loads. See if the crack moves. Then shoot as many heavy loads as you feel comfortable with, one at a time, examining the crack after each shell. Others may differ in their opinions about how to handle this. An expensive gunsmith may use a similar tactic.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#4 | ||||||
|
![]()
Odd place for a crack. If it is a crack, it would easily be welded for a repair.
__________________
B. Dudley |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Brian Dudley For Your Post: |
![]() |
![]() |
![]() |
#5 | ||||||
|
![]()
I thank you all for your thoughts. I did a dye penetrant test tonight and no crack was indicated. That’s a relief! So my only explanation at this point is some type of debris caused the scratch when I opened or closed the gun. Just strange how irregular it is and resemble a crack. Thanks again gentlemen.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 2 Users Say Thank You to Scott Westerlund For Your Post: |
![]() |
|
|