![]() |
![]() |
![]() |
|||||||||||||||||||||||||||||||||||||||
|
![]() |
![]() |
![]() |
#3 | ||||||
|
![]()
It's been fired. Nice gun.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#4 | ||||||
|
![]()
Been fired and someone was a bit ham handed with a screw driver when they got inside it. I suspect the bores have been honed or maybe just well cared for by the former owner.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#5 | ||||||
|
![]()
Mirror bores on an old gun are a red flag for honing and a red flag for getting the wall thickness checked.
Bill is right that that gun has been fired and probably many times |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#6 | ||||||
|
![]()
I don't get to see very many pristine and unshot old guns so its always interesting.
I have just an old beater G that has been shot many times. I know that because of the shell base imprints on the standing breech. It has shiny bores because it was cleaned after use. I don't have a wall thickness gauge and I am no expert, but I did measure the ID of the bores and they are right on for the gauge, so I know they have not been honed. I know that these 2 frame 12's had an original wall thickness of .035 to .045 down the barrels, so I figure I will risk it. Here are a few pictures including a couple boxes of what I shoot through the old G and a Parker table of recommended loads at the time your gun was made. I usually shoot lighter loads because I don't want to whack my shoulder but these loads are for waterfowl and for late season, wild, plains pheasant that we have out here. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 6 Users Say Thank You to Bruce Day For Your Post: |
![]() |
![]() |
![]() |
#7 | ||||||
|
![]()
Yeah.....mirror bores could mean they've been honed, but it just as likely could be that someone always cleaned the bores of this gun which has been fired plenty.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 3 Users Say Thank You to greg conomos For Your Post: |
![]() |
![]() |
![]() |
#8 | ||||||
|
![]()
Thanks for the info, much appreciated. I will have the gun checked before using.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#9 | ||||||
|
![]()
What led you to believe it was unfired? Just curious.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
|