Chokes what to do
Gentlemen I have an issue and we are going to need a sit down. I purchased a wonderful DHE 32" VR Single trigger, beavertail for flyer shooting. I sent this gun to out had it redone, the man show did the work is first class all the way.
From what I know the gun left the shop with both barrels full choked. Someone over the years figured they should open the right barrel up. The bore is .732 but as it gets into the right barrel choke it was done poorly and is a all over the mic. with a final choke of about 18thou for a quarter inch.
I took her out this past weekend and shot some flyers using Remington pigeon loads along with RST 3drm loads. That right barrel is just not tight enough for my likings. Would you unload the gun or have a tube installed. If I was going to have a tube installed I would Wilkensen do the job.
Well whatcha think.
|
Threaded Mode