Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Parker Forums General Parker Discussions

Notices

Reply
Thread Tools Display Modes
non-toxic shot and parkers
Unread 04-06-2012, 10:22 PM   #1
Member
Travis Scott
Forum Associate

Member Info
 
Join Date: Apr 2012
Posts: 19
Thanks: 31
Thanked 6 Times in 1 Post

Default non-toxic shot and parkers

I just bought my first Parker and am new to this group. I was wondering if steel or other non-toxic's will hurt the barrel. I have a Parker 20ga Trojan grade. Any help would be greatly appreciated.
Travis Scott is offline   Reply With Quote
Unread 04-06-2012, 10:45 PM   #2
Member
Parkerman
PGCA Lifetime
Member

Member Info
 
Join Date: Sep 2009
Posts: 268
Thanks: 394
Thanked 77 Times in 45 Posts

Default

It is generally accepted that Parkers and steel don't mix or shouldn't. Barrel metallurgy from the 1800-1900's just isn't up to the effects of steel shot. The various non-toxics question is better answered by those in our group that are much more expert than I.

That said, there are the repo Parkers--one version is called the "Steel Shot Special". If you must use one of these.
Linn Matthews is offline   Reply With Quote
The Following User Says Thank You to Linn Matthews For Your Post:
Unread 04-07-2012, 06:08 AM   #3
Member
MarketHunter
Forum Associate
 
Destry L. Hoffard's Avatar

Member Info
 
Join Date: Nov 2008
Posts: 5,297
Thanks: 646
Thanked 4,413 Times in 1,234 Posts

Default

There are several options, though all are pretty expensive these days. The best is the Kent Tungsten Matrix shells, they still make them in 20 gauge and you won't be able to tell the difference between them and lead. Also RST makes a cartridge that's loaded with NiceShot, any of their 20 gauge loads are excellent. That's probably your two best bets, there are other options but they're mostly out of production and would have to be found on the secondary market.


Destry
__________________
I was as virtuously given as a gentleman need to be; virtuous enough; swore little; diced not above seven times a week; went to a bawdy-house once in a quarter--of an hour; paid money that I borrowed, three of four times; lived well and in good compass: and now I live out of all order, out of all compass. Falstaff - Henry IV
Destry L. Hoffard is offline   Reply With Quote
The Following User Says Thank You to Destry L. Hoffard For Your Post:
Unread 04-07-2012, 06:20 AM   #4
Member
J.B. Books
PGCA Member
 
Pete Lester's Avatar

Member Info
 
Join Date: Jun 2009
Posts: 3,064
Thanks: 1,870
Thanked 5,455 Times in 1,520 Posts

Default

Quote:
Originally Posted by Travis Scott View Post
I just bought my first Parker and am new to this group. I was wondering if steel or other non-toxic's will hurt the barrel. I have a Parker 20ga Trojan grade. Any help would be greatly appreciated.
Do you reload? That opens up other options such as Bismuth.

http://www.precisionreloading.com/mm...Category_Code=
Pete Lester is offline   Reply With Quote
The Following User Says Thank You to Pete Lester For Your Post:
Unread 04-07-2012, 07:36 AM   #5
Member
Big Friend Ten (BFT)
PGCA Lifetime Member
 
Mark Ouellette's Avatar

Member Info
 
Join Date: Jun 2009
Posts: 2,046
Thanks: 1,517
Thanked 2,935 Times in 795 Posts

Default

Travis,

Thank you for joining the PGCA!

As Mr. "Short Ten" Books suggests, reloading is wise when one desires to go fowling with a vintage gun and especially those in gauges other than 12.

Many of us shoot the 2 7/8" in length "short ten" with Nice Shot or ITX with great success!

Mark
__________________
Don't hunt with a gun that will embarrass your dog!

USMC Retired
USMC Distinguished Marksman
USMC Distinguished Pistol Shot
NRA Benefactor - Ring of Freedom member
Mark Ouellette is offline   Reply With Quote
The Following User Says Thank You to Mark Ouellette For Your Post:
Unread 04-07-2012, 11:15 AM   #6
Member
Travis Scott
Forum Associate

Member Info
 
Join Date: Apr 2012
Posts: 19
Thanks: 31
Thanked 6 Times in 1 Post

Default

Although i do not reload i am starting to think it is going to be the way to go. In Minnesota there is lots of federal land to hunt for Grouse and Pheasent and they require nontoxic shot. I will have to start looking into reloaders.

Thanks for all of the help.
Travis Scott is offline   Reply With Quote
Unread 04-12-2012, 01:16 PM   #7
Member
Duckman
Forum Associate
 
Peter Clark's Avatar

Member Info
 
Join Date: Mar 2010
Posts: 361
Thanks: 261
Thanked 445 Times in 126 Posts

Default

Quote:
Originally Posted by Travis Scott View Post
Although i do not reload i am starting to think it is going to be the way to go. In Minnesota there is lots of federal land to hunt for Grouse and Pheasent and they require nontoxic shot. I will have to start looking into reloaders.

Thanks for all of the help.
Travis,
I reload everything and have been quite happy with Nice Shot. Have also shot factory and hand loaded Bismuth with good results and Kent TM. Bang for the buck goes to Nice Shot. Easy to load and MUCH cheaper if you do it yourself. It is not brittle like bismuth.
-plc-
Peter Clark is offline   Reply With Quote
Unread 04-12-2012, 01:45 PM   #8
Member
Kensal Rise
PGCA Member

Member Info
 
Join Date: Sep 2011
Posts: 1,772
Thanks: 625
Thanked 2,590 Times in 929 Posts

Default

Travis:
If your Parker is nice, I'd handload lead for it. Then shoot wherever and wait until the Enviro-Gestapo stops by to cut open one of your cartridges. If they find lead, claim "oops, musta grabbed the wrong shells!"
Scratches in your barrels aren't worth risking non-tox shot. Although some seems to work.

Best, Kensal
John Campbell is offline   Reply With Quote
The Following User Says Thank You to John Campbell For Your Post:
Unread 04-12-2012, 02:43 PM   #9
Member
J. A. EARLY
PGCA Member
 
Jerry Harlow's Avatar

Member Info
 
Join Date: Nov 2010
Posts: 2,112
Thanks: 4,582
Thanked 3,025 Times in 975 Posts

Default

Does anyone have any experience with getting caught with lead for waterfowl? Each year I go to the annual hunting show and there is the Department of Game just as proud as peacocks standing over a box of guns that have been cut in half, showing how hard they are on criminals. Never mind that there are $10,000 worth of over/unders, rifles, etc. cut in half, and it could be daddy's family heirloom gun that the outlaw kid used at night to spotlight a deer. I asked the Director why in this day and time of tight budgets would you not sell those in a lot to the highest bidding FFL holder and use the money to pay a game warden's salary, and he looked at me dumbfounded. So, do they confiscate guns when you violate Federal non-toxic shot only rules? I would not lose a Parker over $3 each shells.
Jerry Harlow is offline   Reply With Quote
Unread 04-12-2012, 03:41 PM   #10
Member
10 bore
PGCA Member
 
scott kittredge's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 1,962
Thanks: 7,869
Thanked 2,657 Times in 856 Posts

Default

Quote:
Originally Posted by Kensal Rise View Post
Travis:
If your Parker is nice, I'd handload lead for it. Then shoot wherever and wait until the Enviro-Gestapo stops by to cut open one of your cartridges. If they find lead, claim "oops, musta grabbed the wrong shells!"
Scratches in your barrels aren't worth risking non-tox shot. Although some seems to work.

Best, Kensal
yes, but do they have a right to take my own shells and cut them open. i would think you would need a search warent.
scott kittredge is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:40 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.