First Parker (Trojan)

[David Champa]

After many months of looking I finally took a shot at a 12 ga Parker Trojan on gunbroker. With such a short description and limited photos I really won’t know much until I get it in my hands next week. BUT for $800 I figured it may be worth the gamble- and the fact it has 26” barrels and IC/M makes it very usable for what I hunt. After some research last night it looks like there weren’t many 26” Trojan barrels so I’m wondering if it was cut at some point or factory. Serial number puts it at 1927, and it looks like Parker started to offer 26” barrels after WWI- so possibly original.

I included a few photos- any insight on this gun would be appreciated!

[10 bore]

Originally Posted by David Champa

After many months of looking I finally took a shot at a 12 ga Parker Trojan on gunbroker. With such a short description and limited photos I really won’t know much until I get it in my hands next week. BUT for $800 I figured it may be worth the gamble- and the fact it has 26” barrels and IC/M makes it very usable for what I hunt. After some research last night it looks like there weren’t many 26” Trojan barrels so I’m wondering if it was cut at some point or factory. Serial number puts it at 1927, and it looks like Parker started to offer 26” barrels after WWI- so possibly original.

I included a few photos- any insight on this gun would be appreciated!

i have one and it took a few years to find a 12 ga 26 in. mine is choked .026 and .009
S/N on mine is 222234

[BRDHNTR]

I have a 20 that Brad Bachelder restored for me. One of the best fitting Parkers in my possession. Great little gun. Trojans are so much fun to shoot.

[Bill Murphy]

You can figure out whether your gun was cut or not by measuring the chokes and by examining the end of the rib and the muzzles.

[J. A. EARLY]

Photos of the muzzle end and the front sight from above will probably answer your question here.

[David Champa]

Originally Posted by Jerry Harlow

Photos of the muzzle end and the front sight from above will probably answer your question here.

I picked up the gun today, it’s in pretty worn condition but overall looks good. I attached a picture of the muzzle end. 26” and choked a fraction tighter than IC, almost like Skeet 2. And improved modified.

Any opinions?

[10 bore]

looks factory to me, my barrel weight is 3 15 on my 26 in. trojan

[David Champa]

Originally Posted by scott kittredge

looks factory to me, my barrel weight is 3 15 on my 26 in. trojan

That’s good to know! Is yours chambered 2 5/8”? Curious what shells you shoot out of yours.

Just bought some 2” low recoil shells from RST, as the 2.5” are out of stock and not estimated to be back until after bird season.

Thanks!

[Dean Romig]

A 2-frame Trojan will easily handle 2 3/4" standard velocity shells.

You wouldn't believe how many have been shot in that gun in its lifetime.





.

[David Champa]

Originally Posted by Dean Romig

A 2-frame Trojan will easily handle 2 3/4" standard velocity shells.

You wouldn't believe how many have been shot in that gun in its lifetime.





.

Well that’s good to know, I was just thinking the shorter chambers would have a modern shell not pattern too well. I’ll grab some and check as soon as I can.