Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Parker Forums Hunting with Parkers

Notices

Reply
Thread Tools Display Modes
Ammo Recommendation for '29 VH 12 Gauge
Unread 10-14-2009, 06:04 PM   #1
Member
T O'Brien
Guest

Member Info
 
Join Date: Oct 2009
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts

Default Ammo Recommendation for '29 VH 12 Gauge

I'm gonna do it. After years of wondering what it can do, I'm taking out grandad's 1929 Parker 12 Gauge VH Grade (Vulcan steel barrel) to take down some ducks. Do any of you have any recommendations/warnings regarding ammo? Any help would be appreciated.
T O'Brien is offline   Reply With Quote
Unread 10-14-2009, 08:04 PM   #2
Member
Bob Jurewicz
PGCA Member
 
Bob Jurewicz's Avatar

Member Info
 
Join Date: Nov 2008
Posts: 1,534
Thanks: 1,737
Thanked 2,228 Times in 610 Posts

Default

T,
Notox Bismuth 2 1/2" shells are available and I believe RST has soft notox as well. Waterfowl hunting requires the non toxic shot and should not be difficult to find, but, expensive.
Bob Jurewicz
Bob Jurewicz is offline   Reply With Quote
Unread 10-15-2009, 05:10 AM   #3
Member
MarketHunter
PGCA Member
 
Destry L. Hoffard's Avatar

Member Info
 
Join Date: Nov 2008
Posts: 5,262
Thanks: 633
Thanked 4,308 Times in 1,212 Posts

Default

Anybody that would shoot steel or Hevi-Shot (other than Classic Doubles) through a damascus gun needs to have their head examined. Pay no attention to Bruce, he's not a duck hunter and knows pretty much nothing about what shells to use for them in old guns as is obvious by his above post.

The cream of the crop as far as non-toxic, double gun friendly, duck loads is either the NiceShot loads from RST or the lighter charge Kent Tungsten Matrix shells. I've shot a lot of the 1 1/4 ounce Kent stuff through 12 gauge Parkers and it's deadly though probably the lighter 1 1/8 ounce shells would be easier on the old guns.

I've used the RST 10 gauge NiceShot loads and they're absolutely terrific. I've not had a chance to try the 12 gauge ones but I'm sure they're equally good as that company doesn't put out a bad shell. The great thing about RST is that all their shells are made with old guns in mind so the pressures are low and the recoil light. I can't say that about the Kent ammo, but the shot won't damage old barrels for sure, even damascus if the loading is reasonable.

Your other choices are the Hevi-Shot Classic Doubles (not the regular Hevi-Shot) and the new bismuth shells from Pinnacle. I've never used either but have heard they're both decent. I've used the old brand bismuth quite a bit and it was fine so I'd say the newer stuff is fine as well.

The one drawback to all this stuff is price, for a standard 12 gauge shell with a 1 1/8 ounce charge you're looking at $2.75 to $3.50 per cartridge depending on which you go with. It's the price you pay for wanting to use an old double for waterfowling. But, I can assure you, the satisfaction you get with taking birds using your Grandfathers gun will far surpass any you'll get from shooting them with a Benelli or other modern fowling piece.

Here's a link to RST:

http://www.rstshells.com/

If you're buying anything short of a case you'll have to contact one of their dealers but that information is on the website as well.

The rest of the stuff can be ordered through the various online sources and some can probably be bought off the shelf at places like Cabela's and Bass Pro.

Good luck and good shooting, I've been killing about 90% of my ducks and geese with Parkers for the past 10 years and I wouldn't change a thing even if the ammo is high dollar.


Regards,
Destry
__________________
I was as virtuously given as a gentleman need to be; virtuous enough; swore little; diced not above seven times a week; went to a bawdy-house once in a quarter--of an hour; paid money that I borrowed, three of four times; lived well and in good compass: and now I live out of all order, out of all compass. Falstaff - Henry IV
Destry L. Hoffard is offline   Reply With Quote
Unread 10-15-2009, 06:10 AM   #4
Member
J.B. Books
PGCA Member
 
Pete Lester's Avatar

Member Info
 
Join Date: Jun 2009
Posts: 2,948
Thanks: 1,728
Thanked 5,074 Times in 1,431 Posts

Default

Destry is spot on with his recommendations. I started shooting Bismuth loads through a Parker in 94/95 and all I could find at that time was 1 3/8 oz in 2 3/4" 12ga. They worked fine and never hurt my gun. However, I would have preferred a little bit lighter load. Around 2000 I started reloading loose Bismuth when it became available. Reloading put me in control relative to shot weight, velocity and pressure and it cut the cost of shooting Bismuth significantly over factory loaded shells but it still ain't cheap.

One question no one as asked, what shape is your gun in, what is the condition of the bores? What frame size and weight of gun are we talking about? These factors would determine how heavy and how "hot" a load I would put through it.

Destry didn't mention ITX shot from Precision Reloading. Most likely because I don't think it's available in factory loaded shells. It is supposed to be classic shotgun friendly but I have read it is still pretty hard. I have got a lot of old loose Bismuth on the shelf, when it runs out I will most likely buy more and perhaps some nice shot.

Waterfowling with a Parker is great fun and very satisfying. I think Destry can attest that shooting a Parker for duck and goose hunting will make you a member of a very small fraternity. Be careful and have fun, it's a blast!
Pete Lester is offline   Reply With Quote
Unread 10-15-2009, 10:36 AM   #5
Member
Don Kaas
Forum Associate
 
Don Kaas's Avatar

Member Info
 
Join Date: Jun 2009
Posts: 560
Thanks: 0
Thanked 223 Times in 92 Posts

Default

Pete and Destry are spot on. In factory loaded non-tox, my standard recommendation for old doubles is currently 1 1/8oz Hevi-shot Classic Doubles or RST Niceshot loads...my club has bought 15,000 rounds of custom Niceshot RST pigeon loads from Morris and Alex and (other than the cost) we are very, very pleased with them.
Don Kaas is offline   Reply With Quote
Unread 10-15-2009, 11:37 AM   #6
Member
Wild Skies
PGCA Member
 
Greg Baehman's Avatar

Member Info
 
Join Date: Nov 2008
Posts: 2,290
Thanks: 1,208
Thanked 3,750 Times in 1,019 Posts

Default

RE: Steel shot through damascus...I thought I had it figured out, but now am a little confused...

In this thread we have a serious waterfowler saying you should have your head examined if one should consider shooting steel shot through damascus guns--and others with long-in-the-tooth experience apparently agreeing with him. Then in this same thread we have another that prefers the uplands, but is an occasional waterfowl hunter that has shot steel shot through open-choked heavy-barreled damascus guns with no ill effects...this leads to my confusion...perhaps a Sherman Bell "Finding Out For Myself" article on the subject would be in order.
Greg Baehman is offline   Reply With Quote
Unread 10-15-2009, 12:56 PM   #7
Member
Opening Day
PGCA Lifetime
Member

Member Info
 
Join Date: Nov 2008
Posts: 3,900
Thanks: 11,172
Thanked 2,093 Times in 1,197 Posts

Default

Sorry but I will have to disagree with Bruce again on this same subject. Shooting steel through these guns is not a good idea, bad wad scored barrel, and if you are shooting premium ammo like Hevi shot then the cost is not much more for Kent TM or RST, besides how many shells are you going to shoot.... Bruce I've said it before and I'll say it again, why take the chance, besides the effects of steel shot in older barrels you have the effects of hot loads like the Remington through guns that have 70 to 100 year old wood and metal, why would you want to do that to your gun and to tell someone who is a newbie to these guns that it is "ok" to shoot Steel shot through them is just pure irresponsible... Eric
Eric Eis is offline   Reply With Quote
Unread 10-15-2009, 01:21 PM   #8
Member
Bruce Day
PGCA Lifetime
Member
 
Bruce Day's Avatar

Member Info
 
Join Date: Nov 2008
Posts: 4,995
Thanks: 554
Thanked 15,664 Times in 2,672 Posts

Default

I will leave the forum to others and have deleted all recent posts.
Bruce Day is offline   Reply With Quote
Unread 10-15-2009, 02:18 PM   #9
Member
Autumn Daze
PGCA Lifetime
Member
 
Dave Suponski's Avatar

Member Info
 
Join Date: Nov 2008
Posts: 5,896
Thanks: 4,385
Thanked 4,074 Times in 1,731 Posts

Default

Bruce,You do not have to leave... Just explain to us your reasoning and mindset on this subject.And maybe a great discussion would ensue.
__________________
"Much care is bestowed to make it what the Sportsman needs-a good gun"-Charles Parker
Dave Suponski is offline   Reply With Quote
The Following User Says Thank You to Dave Suponski For Your Post:
Unread 10-15-2009, 04:07 PM   #10
Member
MarketHunter
PGCA Member
 
Destry L. Hoffard's Avatar

Member Info
 
Join Date: Nov 2008
Posts: 5,262
Thanks: 633
Thanked 4,308 Times in 1,212 Posts

Default

Bruce has done this before, he'll return I'm sure. *rolls eyes*

You can't give out that kind of bad advice and not expect folks who know better to not speak up.
__________________
I was as virtuously given as a gentleman need to be; virtuous enough; swore little; diced not above seven times a week; went to a bawdy-house once in a quarter--of an hour; paid money that I borrowed, three of four times; lived well and in good compass: and now I live out of all order, out of all compass. Falstaff - Henry IV
Destry L. Hoffard is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:18 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.