![]() |
![]() |
![]() |
|||||||||||||||||||||||||||||||||||||
|
![]() |
![]() |
![]() |
#3 | ||||||
|
![]()
A friend has a 32" 12 gauge Repro. Only one I've heard of.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#4 | ||||||
|
![]()
Bill, remember this thread?
http://parkerguns.org/forums/showthread.php?t=11524 We're still waiting for the rest of the story. ![]()
__________________
Wild Skies Since 1951 |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Keeping the vigil | ![]() |
![]() |
#5 | ||||||
|
![]()
Guys, thanks for the replies. I'll keep looking....... Grant
__________________
Oldmodel70 |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#6 | ||||||
|
![]()
I have a set of 30" that I added to my SSS. A couple of years after I purchased the gun, John Allen contacted me saying that Mr. Skeuse had a set available. I sent the gun to New Jersey so the barrels could be fitted. Also exchanged the case for a two barrel case.
These 30" barrels fit well, but the forend fits a tighter than with the 28" barrels. Always wondered if any fitting work was actually done. Concerns me a little, possibly the front of the forend lug should be stoned a little? Have not shot a box of shells through these barrels. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#7 | ||||||
|
![]()
Before stoning the forend lug, try the fit with the forend removed. If it is still tight with the forend removed, it isn't the lug that is the problem.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#8 | ||||||
|
![]()
Jack Skeuse told me that there were 25 30"barrel sets ordered.They were going to make a run of them,but the plant was closed before they could produce more.The set I have with the prototype steel shot special were given to me by Jack after we finished the steel shot special project.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#9 | ||||||
|
![]()
Bill,Are you sure those are 32" barrels?I have never seen or heard of a set.I do know that the Skeuse family had a lot of prototype guns and barrels made.I just did an appraisal on the only BHE steel shot special made.I ordered it and sold it when I worked at Jaegers.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#10 | |||||||
|
![]() Quote:
|
|||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
|