|
 |
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
 |
12-07-2023, 03:14 PM
|
#3 | ||||||
|
What tool did you use to measure the chokes? Even if cut 2 inches there should be some amount of constriction in the tubes. Parker’s used 4 to 5 inches in their normal choking process. If you didn’t use a bore gauge then there could still be some choke left in the barrels, unless they were honed out to cylinder on purpose.
|
||||||
|
|
||||||
 |
 |
 |
| The Following 3 Users Say Thank You to David Noble For Your Post: |
|
|
|
12-07-2023, 04:00 PM
|
#4 | ||||||
|
Used a bore gauge to measure the chokes. IF the barrel was cut and honed, Then why are the barrels together at the end (no space between the barrels) and why is there an blank( not engraved) lenght at the end of the barrel ?
Richard |
||||||
|
|
|
||||||
|
|
|
|
|
|
12-07-2023, 04:48 PM
|
#5 | ||||||
|
The answer may never be told, but the speculation is fun. There are many possibilities. I have seen cut barrels still touching with 4" removed.(1) A lot has to do with the gauge vs frame size, but generally, they are quite likely to be touching each other 2" back from the muzzle.
(2) Skilled people have faked the "blank" at the end of the rib. (3)The rib 'could' be shortened on the dolls head end, moved back, then re-soldered. (4)The "book" could be wrong, and they were always 28", and honed by someone in the past. (5) The book was right, but a different set of barrels could have been fitted and renumbered. It isn't universally true that longer barrels are more tightly choked, but that's a reasonable assumption. Original Parker reamers have shown the taper was straight, at least at certain periods. In this case, it holds true that the tighter the choke, the longer it is. An IC choke will almost certainly become cyl when cut back two inches. Likewise, a Full choke will be more like Mod when cut back 2". whatever the answer, in the end it's just speculation. |
||||||
|
|
||||||
|
|
|
| The Following 11 Users Say Thank You to edgarspencer For Your Post: |
|
|
|
12-08-2023, 09:58 PM
|
#6 | ||||||
|
Richard, can you post a picture of the end of the barrels
__________________
"How kind it is that most of us will never know when we have fired our last shot"--Nash Buckingham |
||||||
|
|
|
||||||
|
|
|
|
|
|
12-09-2023, 10:48 AM
|
#7 | ||||||
|
Thanks for your insight(speculation), since the gun was sent back to Parker in 1907( made in 1901) to be restocked and dents removed from the barrel, it is quite possible that the barrel and rib were shorten and honed to cyl and cyl at that time. Anyhow, I enjoy to shooting the gun at SxS meets and elsewhere , so it will stay with me and be passed on to family. Richard
|
||||||
|
|
|
||||||
|
|
|
| The Following 2 Users Say Thank You to Richard Weyers For Your Post: |
|
|
|
12-09-2023, 10:56 AM
|
#8 | ||||||
|
I will see about picture, my be awhile, old folks learn slowly, Richard
|
||||||
|
|
|
||||||
|
|
|
|
|
|
12-09-2023, 05:03 PM
|
#9 | ||||||
|
Richard, if you like the gun, shoot it well, and plan to keep it, that sounds like a perfect outcome.
__________________
"Doubtless the good Lord could have made a better game bird than bobwhite, and better country to hunt him in...but equally doubtless, he never did." -- Guy de la Valdene (from A Handful of Feathers ) "'I promise you,' he said, 'on my word of honor, I won't die on the opening of the bird season.'" -- Robert Ruark (from The Old Man and the Boy) |
||||||
|
|
|
||||||
|
|
|
| The Following 5 Users Say Thank You to Garry L Gordon For Your Post: |
|
|
|
12-14-2023, 03:59 PM
|
#10 | ||||||
|
I hope this works, attached are two picture of the front of the barrel
|
||||||
|
|
|
||||||
|
|
|
 |
|
|
16 Gauge Barrel
Linear Mode
