![]() |
![]() |
![]() |
||||||||||||||||||||||||||||||||||||||||
Visit Brian Dudley's homepage! | |
![]() |
![]() |
![]() |
#3 | ||||||
|
![]()
I would recommend using a lint-free cloth, not cotton but a fine weave synthetic like nylon panty-hose...... oops, am I aging myself?
.
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Dean Romig For Your Post: |
![]() |
![]() |
![]() |
#4 | ||||||
|
![]()
Thanks for the tips guys. Brian, I'm encouraged by your comments because much of what you've described is pretty spot-on with what I've experienced working this stock. That tells me I'm experiencing typical challenges & not off on some whacky adventure into the world of Shellac, with reckless abandon..
There's something quite nice & organic about the glow & overall feel that's coming forth as I get closer & closer to completion. I'm also pleased to learn there's a higher degree of moisture resistance then what seems to be associated with this type of finish. I would guess much of that has to do with the level of finish the work-pc is taken to. (e.g., number of coats, rubbing-out, etc) Thanks again. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#5 | ||||||
|
![]()
Scot, how many coats are you planning on doing?
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#6 | ||||||
|
![]()
Since I'm on a bit of a learning curve, I haven't a recipe nor any particular number of coats I'd like to apply, Eric. When it looks and feels right, I'll simply stop. (I think I have 4 or 5 coats at present)
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#7 | ||||||
|
![]()
You will likely find that you are about half way there.
How thick you have your shellac mixed will add into the equation.
__________________
B. Dudley |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 2 Users Say Thank You to Brian Dudley For Your Post: |
![]() |
![]() |
![]() |
#8 | ||||||
|
![]()
I have been refinishing my stock with the Parker finish from Galazan. I found that I could eliminate brush strokes by cutting the finish almost 50% and using a very fine natural bristle brush. I am not a fan of glossy finishes, so I will dull it down with pumice stone and Linseed/ tongue oil which gives a pretty good satin finish as I remember.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Bill Paul For Your Post: |
![]() |
![]() |
![]() |
#9 | ||||||
|
![]()
I use french polish. I apply it with a soft cloth. It dries within a few minutes depending on the humidity. Not a high glossy finish. If you search the thread "show me some wood" I have pics of the three Parkers that I finished.
Tom |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Tom Pellegrini For Your Post: |
![]() |
![]() |
![]() |
#10 | ||||||
|
![]()
Try halving your shellac to a 1 lb cut. That has worked well for me in terms of avoiding streaks. Also, I like to finish it off with a couple coats of Timberluxe to get the right sheen.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Justin Julian For Your Post: |
![]() |
|
|