|
10-18-2013, 07:11 AM | #6 | ||||||
|
the last picture looks like more than light surface rust.
get some steel wool and oil and get the rust stopped - sort of first aid. then, since its a family piece, and if you plan to keep it - unless you are experienced with such projects, I would find a QUALIFIED double gun gunsmith. how are the bores? If they are badly pitted, that might affect the decision to put much into it. If you give a general location, some one may be able to recommend a gunsmith
__________________
"If there is a heaven it must have thinning aspen gold, and flighting woodcock, and a bird dog" GBE |
||||||
10-18-2013, 07:46 AM | #7 | ||||||
|
You have a common dilemma. A family heirloom in poor condition that you'd like "restored."
First, understand that it's value as an heirloom cannot be measured except by you. Thus the cost of restoration must be considered an investment in your family legacy and not a pure cost issue. Accept that you will spend more in the gun's revival than it will ultimately be "worth" on the market. That said, I'd say keep your family's legacy intact, and find a PRO to restore the gun. Brad Bachelder is currently much preferred for this and will do a fine job. |
||||||
10-18-2013, 10:39 AM | #8 | ||||||
|
From a standpoint of maintenance, I would recommend at least re bluing the barrels.
__________________
B. Dudley |
||||||
|
|