|
05-12-2024, 06:41 PM | #3 | ||||||
|
Chuck,
I have two boxes of these 8 gauge Gamebore shells. They are also Remington Industrial hulls that have been resized, apparently this is what Gamebore utilized for their ammo. Stan |
||||||
05-12-2024, 10:35 PM | #4 | ||||||
|
Don't forget that England still allows 8 gauge for some hunting and that many of the older English guns have a larger chamber than the US did. I have a mint Scott 8 gauge that accepts a industrial hull perfectly and works well with them. The front half of the brass fireforms out slightly to fit the chamber.
|
||||||
05-14-2024, 10:25 AM | #5 | ||||||
|
Don't fire the kiln shell in any sporting shotgun, even if they fit in the chambers.
|
||||||
The Following User Says Thank You to Bill Murphy For Your Post: |
05-14-2024, 12:41 PM | #6 | ||||||
|
|
||||||
The Following User Says Thank You to Stan Hoover For Your Post: |
05-14-2024, 01:10 PM | #7 | ||||||
|
Honestly , do you “really” think anyone on here would try and shoot actual industrial loads in a true sporting gun . I think not !
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
||||||
05-14-2024, 02:38 PM | #8 | ||||||
|
To answer Stan's comment, may I state that Chuck said the three boxes were "industrial shells". I took him at his word.
|
||||||
05-14-2024, 02:49 PM | #9 | ||||||
|
The base said Remington Industrial.
|
||||||
05-14-2024, 04:03 PM | #10 | ||||||
|
They do but the box is clearly marked as 2oz of No.3 shot and Black Powder. They are using the hulls for reloads.
This is an interesting area, as I brought up above. I don't own a US made 8 gauge, but I believe that older British 8 gauges had larger chambers than their American counterparts. I know the Scott single I own is fit perfectly by the new Remington hulls I own. They are made with the two layer head crimped over the regular head. A brass RMC 8 gauge is slightly loose in the chamber and I won't fire these until I anneal them. I will recieve the Webley double of the same age tomorrow and I am interested to see if it has a small or large head chamber. I became more curious when I recieved an antique 8 gauge loading tool the other day. Someone mentioned it in a post and I purchased it. It included a used (well) red Remington hull marked Remington Apex No. 8 (if I remember) and had "Hand Loaded" printed on the hull. Remington UMC was stamped around the head above the rim in a rather bold stamping. It was a very old hull which predated the industrial loads and I am sure was a commercial hunting load originally, but it had the same two layer head design. Pictures I have seen of British loads also seem to often have this construction. I am coming to suspect that for most of the sporting history of the 8, the two continents did not match. Another interesting point is that after looking at the CH die charts/dexcriptions and some technical info , I believe many Industrial loads now feature a cylinderical, of sorts, metal bullet/slug. That may reflect multiple uses. I may have related before that the father and son gunsmiths I used for years were full time machinests for the C&O railroad yards in Russell KY. It was the largest manual switching yard in the world and had a big repair/construction section for rail cars. The yard used regular Mossberg 12 gauge shotguns for descaling boilers. They had the contract for rebuilding these gun every 100,000 rounds.. They said many of the guns went through 6 or seven rebuilds before being retired. |
||||||
The Following User Says Thank You to Arthur Shaffer For Your Post: |
|
|