|
09-16-2022, 06:32 AM | #3 | ||||||
|
I had an ejector repaired by Turnbull and am very pleased with it.
__________________
May you be blessed with plentiful game in the fields, the time to hunt, a good bird dog in front of you, a Parker in your hands and friends to share the adventures with. |
||||||
The Following User Says Thank You to Donald F. Mills For Your Post: |
09-16-2022, 07:30 AM | #4 | ||||||
|
I would fix the ejector and leave the wood as is you will have to do forend also. Can't really see the wood from your pictures
|
||||||
The Following User Says Thank You to Steve Huffman For Your Post: |
09-16-2022, 09:18 AM | #5 | ||||||
|
Can you post some photos of the wood so that we can best see what shape it is in and to advise.
I would say that Delgrego would be a fine choice for ejector repair work. But to not let them touch anything cosmetic on the gun. The last wood refinish I saw out of there had a sprayed bowling alley finish on it and there was still remnants of blue painters tape stuck in the edges of the checkering. Eeek… That was also a PHE.
__________________
B. Dudley |
||||||
The Following 8 Users Say Thank You to Brian Dudley For Your Post: |
09-16-2022, 10:07 AM | #6 | ||||||
|
If the wood finish is looking rough... I guess I might be in the minority, but I see absolutely nothing wrong if you have that touched up, especially if done correctly. (One caveat, if it's a family heirloom sort of gun, then I would be reluctant to change anything if possible)
I had the stock of one of my guns redone by Brian Board at Timberluxe, and it looks the way it should. I've also seen a lot of Brian Dudley's work on here, or on FB, and it is excellent as well. As long as the gun ends up looking the way it should... I just don't see anything wrong with "tuning" it up a bit. Now, if you go change dimensions, restocking, or altering the gun so it does not represent how it looked when it was new... That's another thing. Just my opinion though, everyone is entitled to their own.
__________________
The only reason I ever played golf in the first place was so I could afford to hunt and fish. - Sam Snead |
||||||
The Following 3 Users Say Thank You to Joseph Sheerin For Your Post: |
09-16-2022, 08:19 PM | #7 | ||||||
|
Thanks I posted photos of the finish.
|
||||||
09-16-2022, 08:37 PM | #8 | ||||||
|
I would refinish the butt stock with amber shellac which is what Parker used. The old shellac will come off with alcohol. Read up on how to apply shellac (French Polish) and practice on a piece of wood until you get the hang of it. You don't want the applicator to stick while applying shellac.
|
||||||
The Following 7 Users Say Thank You to Chuck Bishop For Your Post: |
09-16-2022, 09:08 PM | #9 | ||||||
|
Duplicate
|
||||||
The Following 3 Users Say Thank You to Chuck Bishop For Your Post: |
09-19-2022, 09:37 PM | #10 | ||||||
|
Sean
I had sent VHE skeet gun to DelGrego last year to have the broken ejector fixed and also have it completely taken apart serviced and replace one of the ivory beads. The work was not inexpensive. I got the gun back took it shooting and when I got back I took it apart for cleaning and it would not go back together. I found out that the part on the fore end did not reset itself. Needles to say I was very disappointed I would never use them again. |
||||||
The Following 2 Users Say Thank You to bob lyons For Your Post: |
|
|