!0ga on a #1 frame

[David Noble]

I was looking at the chart from TPS on frame sizes/gauges and was surprised to see that the #1 size frame was listed as being available in a 10ga!
Has anyone here owned one or even ever seen one? How thin would the breech end of the chambers be?!!

[B. Dudley]

Since the chamber size between 10 and 12 is minimal, I would think it very possible if the barrel striking was kept very straight. I would not think the breech to be much lighter than many 0 frame 16g guns.

[Jay Oliver]

Here is a real early gun #46 in 10 gauge. This was before frame sizes but it sure feels like a 1 frame 10 gauge...

[Mike Franzen]

What’s the measurement between the firing pins?

[Dean Romig]

I believe Bro. Murphy has one.





.

[Jay Oliver]

I don't have it in front of me from memory it was either 1 1/16" or 1 3/32"

Given that it is a 2 5/8" 10 made for black powder shells it wouldn't be as unique a newer 2 7/8" hammer gun or even a hammerless 10 on a 1 frame(which I think would be neat!).

[Ken Hill]

Jay,

The chamber walls look like a 2" 12 gauge. What does the gun weigh?

Ken

[Researcher]

A 1-frame, as I recall Quality DH, 10-gauge came by the PGCA booth at The Vintage Cup at Sandanona a couple of different years. It was pretty rugged and the owner was IMHO more than a little over the top as to what it was worth. Ron Kirby checked the serial number in the records and the gun was right.

[Jay Oliver]

With the solid back action frame it is not super light. It's around 7 1/2 pounds, still feels nice especially for a 10...

[Bill Murphy]

Murphy does not own the #1 frame ten that we saw at the Vintagers a few years ago. Looking at the open breech was more than scary.