|
04-15-2014, 09:05 PM | #3 | ||||||
|
the number lists as a 30" twist barreled lifter.
looking forward to the pictures
__________________
"If there is a heaven it must have thinning aspen gold, and flighting woodcock, and a bird dog" GBE |
||||||
04-16-2014, 03:23 PM | #4 | ||||||
|
30", twist and lifter indeed
|
||||||
04-16-2014, 07:35 PM | #5 | ||||||
|
Welcome William,
You may wish to contact Chris Dawe, if you on't know him already. He lives in Newfoundland and does some pretty impressive work on Parkers for a number of members here in the States. |
||||||
The Following 2 Users Say Thank You to Dean Romig For Your Post: |
04-16-2014, 07:51 PM | #6 | ||||||
|
I've known Chris for a little over 3 years now and he has worked on several of my double guns in that time. I've also had the pleasure of tagging along on a couple hunts with Chris. We were actually talking about this Parker yesterday. We live only about a 30 minute drive from each other, and yes, he does some great work!
|
||||||
The Following 2 Users Say Thank You to WilliamGuest For Your Post: |
04-16-2014, 08:37 PM | #7 | ||||||
|
I have #6164 10ga 28" barrels, Plain twist. I would be happy to compare guns. David
|
||||||
The Following User Says Thank You to David Hamilton For Your Post: |
pictures |
04-18-2014, 09:32 PM | #8 | ||||||
|
pictures
Just two quick shots, sorry for the quality, will post better detailed pictures when I get the chance. Most exposed metal was covered with crud and light surface rust, cleaned up very good, leaving a nice patina. Barrels show lots of pattern remaining, do have several dents and pitting in bores, with a slightly loose bottom rib. Wood shows use and damage. Buttstock is cracked in several areas (head, tangs). Hammer's still have plently of tension, very firm and crisp! Action is a little loose, but a couple of shims have temporarily tightened things up. These pictures don't do it justice, (as said, will post better ones) really pleased with how well the metal cleaned up. (hoppes oil and some extra fine steel wood) I don't think she looks too bad for 139 years old!
|
||||||
The Following 2 Users Say Thank You to WilliamGuest For Your Post: |
04-19-2014, 09:07 AM | #9 | ||||||
|
Those firing pin springs are ofter broken on these old guns. Easy fix. The loose rib is a bigger problem. I believe that it must be removed and re-soldered. There are people on this site who can tell you the best smith to do the job. David
|
||||||
04-19-2014, 09:23 AM | #10 | ||||||
|
Having a rib fixed properly is very expensive. More than the value of the gun. JMHO
|
||||||
|
|