Stock Crack behind Safety

Dylan Rhodes · 02-18-2021, 08:44 PM

Hi Everyone,

I’m picking up my first Parker soon a 12 gauge VHE and there is a stock crack behind the safety about 1/4” to 1/2” long. I’m wondering if anyone could shed some light on how much of an undertaking ,financial and physical, it would be to have it repaired such that you couldn’t tell it was there. Recommendations on a person to send it to is also appreciated.

Also would be interested in opinions on leaving it as it is. I shoot less than 10 shells a year through it and I’m a mild stickler for originality.

Randy Roberts · 02-18-2021, 09:31 PM

Hi Dylan:
Try member Brian Dudley. Looks minor from here and I would guess it could be made to disappear.

B. Dudley · 02-18-2021, 10:58 PM

And there may be absolutely nothing wrong at all...

Except your safety button is installed backwards.

Dylan Rhodes · 02-18-2021, 11:01 PM

Quote:

Originally Posted by Brian Dudley

And there may be absolutely nothing wrong at all...

Except your safety button is installed backwards.

Now that is bizarre......what do you make of that?

B. Dudley · 02-18-2021, 11:02 PM

Quote:

Originally Posted by Dylan Rhodes

Now that is bizarre......what do you make of that?

Someone took it apart and put it back together the wrong way.

Dylan Rhodes · 02-18-2021, 11:04 PM

Quote:

Originally Posted by Brian Dudley

Someone took it apart and put it back together the wrong way.

Do you think it would still work even if it’s on backwards? I guess that a lesson learned for me there.

Dylan Rhodes · 02-18-2021, 11:23 PM

Quote:

Originally Posted by Brian Dudley

Someone took it apart and put it back together the wrong way.

I will reach out when I have had a better chance to examine it if I want to repair anything. Thank you

J. A. EARLY · 02-19-2021, 12:17 AM

XXX

edgarspencer · 02-19-2021, 08:57 AM

Cracks in that location aren't uncommon, more so on single trigger guns, as there is less wood. I would recommend that you fix it because you never know when you might bump it sideways and then have a split stock. Repairs are almost always stronger than the original stock.

Cameron Thraen · 02-20-2021, 02:32 PM

Splits behind the top tang can be indicative of the frame moving on recoil. Not always but usually. Slight rearward movement of the frame causes the tang to work like a wedge forcing the grain apart. B. Dudley can tell you if it is frame to stock gap and if this needs to be repaired. Splits do not get better with use.