|
11-12-2015, 06:57 PM | #3 | ||||||
|
difficult if you hide half the serial number
some other models - including Flues shared number ranges with NIGs i have heard there are some errors in here that were corrected in a later edition http://www.ithacagun.com/pdfs/serialnumbers.pdf
__________________
"If there is a heaven it must have thinning aspen gold, and flighting woodcock, and a bird dog" GBE |
||||||
11-12-2015, 07:02 PM | #4 | ||||||
|
It is definitely a NIG (New Ithaca Gun) hammer Ithaca. This was before any of the hammerless varieties were offered. And it is a graded gun to boot. Not often seen. Based on the water table stamping, it is a 12g. and the C would be the grade I assume since this is where Ithaca always stamped the grade on the later hammerless guns, but they used a number grading system. Based on the engraving style, it looks to be equal to a grade 3 or 4.
What are you doing with the gun?
__________________
B. Dudley |
||||||
11-12-2015, 09:15 PM | #5 | ||||||
|
Yes. A Quality-C New Ithaca Gun (NIG). The NIG replaced the original Ithaca Gun Co. Baker Model hammer gun in 1887 beginning at serial number 6550. The NIG continued to be produced along with and serial numbered with the Crass, Lewis, Minier and Flues Model hammerless guns to 1914. Higher grade NIGs are quite scarce.
NIG grades were letters -- the X-Grade NIG equaled the Field Grade hammerless, the A-Grade NIG equaled the No. 1 hammerless, the AA-Grade NIG equaled the No. 1 1/2 hammerless, the B-Grade NIG equaled the No. 2 hammerless, the C-Grade NIG equaled the No. 3 hammerless, the D-Grade NIG equaled the No. 4 hammerless, and the E-Grade NIG equaled the No. 5 hammerless. In 1914 the NIG was replaced with a short-lived hammer double called the "Two-Bolt Model" that was essentially a hammer version of the Flues Model hammerless. |
||||||
11-13-2015, 09:02 AM | #6 | ||||||
|
The full serial # is 195XX0 which puts the gun squarely within the 1910 Flues serial range. I do agree that it is a NIG, as does the current Ithaca gun Company's historian lady. Apparently she has some of the records from the original company. However, it is our mission to positively identify the model and grade. We'd like to give a current intrinsic value of the gun to our customer. Our customer who owns the gun currently, is the son of the original owner (a physician). The gold shield inletted into the stock has the name of the doctor engraved into it. If we can positively identify the gun, barring any significant historical value, the current owner wishes us to do a full restoration using the original methods Ithaca used to manufacture the gun. He then plans to gift it to his son so as to insure it stays in the family! I wish to thank all of you folks in advance for any assistance you've provided or will provide.
Respectfully, Jim |
||||||
11-13-2015, 09:10 AM | #7 | ||||||
|
I might add just my opinion here if it means anything, i would recommend to your customer to not restore the gun. Obviousky i am speaking based on just what i see of the gun in the photos. But it looks to have a good amount of orignal case color and barrel finish remaining. Guns are only original once and a gun with original condition will always be worth more than a refinished one. And the value will usually never be boosted by more than the cost of the restoration.
In this case, if it needs some stock finish, or checkering touched up or a screw fixed here or there, those things may help the overall presentation of the gun, but if all is in good to very good original condition, leave it be. I think that a FULL restoration of the gun will hirt this one in particular. We habe established that the gun is a NIG hammer grade C. (Equal to a grade 3 hammerless). Determining a value may be a little difficult since there are few examples out there. I woukd say an equal grade 3 hammerless woukd be in the $2,000-3,000 range. So this one should be in the same ballpark of not more given it is a hammer gun.
__________________
B. Dudley |
||||||
The Following 5 Users Say Thank You to Brian Dudley For Your Post: |
11-13-2015, 09:21 AM | #8 | ||||||
|
A friend owns and shoots a B grade NIG 16 gauge with 32" barrels. I, personally, have never seen a C grade. A full refinish will definitely lower the value of the gun substantially. I worked in the shop where the B grade 16 was sold, but somehow let it slip away. I once owned an NIG with steel barrels and let that one go too.
|
||||||
The Following 2 Users Say Thank You to Bill Murphy For Your Post: |
11-13-2015, 09:46 AM | #9 | ||||||
|
Brian, I fully agree with you on not restoring the gun. The barrels are Damascus twist steel and show very little pitting inside. I've run a bore scope in the tubes and the pitting is very minor and shallow. Short of Radio-graphing the barrels I feel it would be safe to shoot (if desired) with black powder pressure equivalent loads. This is a beautiful gun in good condition with great patina. I personally am leaning towards a light refinish and touch up of the stock set only. There are a few dings and scratches in the wood, which is exceptional and beautifully figured feather crotch American Walnut. It just needs a cleaning to highlight the figure again. Years of accumulated dirt and oil have dulled and hidden the figure. Now that I have several experts in agreement that it is a "C" grade NIG, I feel the customer is better served by leaving the gun "as is". Thanks again!!
|
||||||
The Following User Says Thank You to Jim Majoros For Your Post: |
11-15-2015, 01:53 PM | #10 | ||||||
|
Really nice and really really rare. You would have to look long and hard for another. Field grade NIGs are fairly common. The B grades show up rarely on GB and GI but I dont recall ever seeing any of the higher grade NIGs before your post. Thank you for pictures. I have a field grade 12 and a B grade 16 and have shot both with RST 2 1/2" with no problems. I think they are nicer than most of the sidelock hammer guns from that era.
|
||||||
|
|