|
Thanks Dean! |
10-20-2014, 07:24 PM | #3 | |||||||
|
Thanks Dean!
Quote:
Here are some pix. In addition the breech end of the flats have "+" signs on each side. and the forend lug has an "X" on it. No idea what any of it means. |
|||||||
10-20-2014, 07:27 PM | #4 | ||||||
|
The X is thought to be an inspector's mark. Likewise the + stamps.
|
||||||
The Following User Says Thank You to Dean Romig For Your Post: |
10-20-2014, 07:53 PM | #5 | ||||||
|
I have often thought that the + symbols could represent a bore that might be a bit over nominal. Such as a set of tubes that were patterned and were returned to the barrel borer to have a bit more choke put in them. JMHO though.
__________________
"Much care is bestowed to make it what the Sportsman needs-a good gun"-Charles Parker |
||||||
The Following User Says Thank You to Dave Suponski For Your Post: |
10-21-2014, 05:13 PM | #6 | ||||||
|
Dave, you're making me tired. You mean I have to dig out guns and measure bores?
|
||||||
10-21-2014, 06:10 PM | #7 | ||||||
|
Dave did you mean add choke (tighter)or take away ( open up) ?
|
||||||
10-21-2014, 06:41 PM | #8 | ||||||
|
In order to add choke to a finished set of barrels they must be "jug choked" or "back bored" resulting in barrels that have been "over bored".
|
||||||
The Following User Says Thank You to Dean Romig For Your Post: |
10-21-2014, 06:51 PM | #9 | ||||||
|
Steve, My thoughts are that the barrels were sent back to the barrel dept. to be back bored for more choke constriction. The + sign might be added to inform future employees that these barrels have larger than nominal bores. Or.....the tubes could have been bored oversize during the original barrel boring operation and this is a stamp to indicate that.
Maybe I should start a new thread asking members to measure the bores of guns they have with the + sign to find out if my thinking is on track or just BS.
__________________
"Much care is bestowed to make it what the Sportsman needs-a good gun"-Charles Parker |
||||||
The Following 3 Users Say Thank You to Dave Suponski For Your Post: |
10-21-2014, 06:55 PM | #10 | ||||||
|
I think you should.
|
||||||
Tags |
barrels, grades, markings |
|
|