|
10-20-2013, 03:36 PM | #3 | ||||||
|
nice gun ed... charlie
|
||||||
10-20-2013, 03:43 PM | #4 | ||||||
|
I have one very similar to that one made by Franz Kettner .
Mine is choked full and fuller !
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
||||||
10-30-2013, 06:37 PM | #5 | ||||||
|
most of these prewar german guns are a joy!
|
||||||
10-30-2013, 08:23 PM | #6 | ||||||
|
I have a Wm Collath single shot rifle 6.5x52R with a pre war scope thats kinda intresting as well !
Incidently when I bought that thing I was a little worried about ammo and come to find out thats the euro designation for the 25-35 WIN ! I have some old 60's factory loads for the 25-35 and when I fired them in this rifle at 100 yards I was easily getting 1 1/2" groups which I thought was very nice for this OLD rifle scope combo with almost as old ammo . That one may get a nod next year during the Damage Control Permit season .
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
||||||
The Following User Says Thank You to CraigThompson For Your Post: |
10-31-2013, 12:00 AM | #7 | ||||||
|
Love the Collaths!
|
||||||
10-31-2013, 11:07 AM | #8 | ||||||
|
I have a Kettner drilling thats chambered for a cartridge Collath desgined !
The shotgun barrels are 16 and 16 but the rifle barrel is 10.75x65R Collath . I use a 207 grain cast gas check bullet sized to .429" and pushed with about 16 grains of SR4756 . To make brass for the cartridge I took Hornady 405 WIN brass cut it down to length ran the case partially in a 444 sizing die . I also had to turn the rim diameter and thickness on our lathe . But after all that I was finally able to get it to shoot decently at 50 yards with the irons .
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
||||||
10-31-2013, 01:32 PM | #9 | ||||||
|
|
||||||
10-31-2013, 03:36 PM | #10 | ||||||
|
Is that your howdah pistol? That is awesome.
|
||||||
|
|