|
06-18-2014, 03:17 PM | #3 | ||||||
|
It shouldn't be significantly different from any other Parker Bros. or Remington Parker right extractor. In fact, a good smith should be able to make one for you.
|
||||||
06-18-2014, 03:56 PM | #4 | ||||||
|
Repro parts are very hard to find since most were destroyed after the flood. If original parts would work Brian Dudley may be able to help. Contact him by PM and ask.
Bob Jurewicz |
||||||
08-04-2014, 12:05 PM | #5 | ||||||
|
Any suggestions as to who might be able to make me one or somebody who has parts?
Thanks! |
||||||
04-13-2015, 08:27 PM | #6 | ||||||
|
I may be able to help.
I recently started a Parker parts service. Send me a pic of the part, unless you already found one. I recently reversed engineered and produce Ejector hammers, successfully and THAT is no easy part to make or find ! blackjackcash2@cs.com Cheers, JoeB |
||||||
The Following 3 Users Say Thank You to joe breda For Your Post: |
04-23-2015, 01:27 PM | #7 | ||||||
|
What did Krieghoff USA say? If they plead ignorance, ask to speak to the man in charge, Dieter Krieghoff. He is probably on the phone to Germany at least once a day.
|
||||||
04-29-2015, 08:24 AM | #8 | ||||||
|
How about repairing the broken one?
|
||||||
05-04-2015, 01:52 PM | #9 | ||||||
|
I may be able to help. I recently started to reverse engineer and re-manufacture Parker parts and other parts for the Classic SxS's. As an example I reverse engineered and CNC machined ejector hammers, Not an easy part to manufacture. I may be able to do the same for the extractor. See example of what I am capable of doing. Contact info 661-943-7158 blackjackcash2@cs.com
CHEERS, JoeB |
||||||
The Following User Says Thank You to joe breda For Your Post: |
05-06-2015, 10:44 AM | #10 | ||||||
|
..very nice Joe.
..do you have modeling software & generate programs to load into your control? What about h/t? In house? |
||||||
|
|