|
03-03-2015, 12:38 PM | #3 | ||||||
|
Bore condition is pretty important. Exterior pitting is now being microwelded to fill the pits and then refinished. This procedure is starting to gain in popularity, although I know nothing of the costs involved. Someone will surely tell you it needs to only be done by a gunsmith who understands finish, etc. I disagree. It only needs to be done by someone who has been told what kind of metal to use during the welding process. That info can be obtained. There are even some recent threads on the DoubleGunShop.com and 16ga.com where individuals have done this work themselves. They obviously know how to weld itty-bitty stuff so please don't mistake me for suggesting you do the same. I'm just saying this stuff is apparently not rocket science, but rather requires the proper equipment and knowledge. Microwelding is specialized. A member of this forum has a friend who did this work for him as a favor and it turned out great - that guy wasn't a gunsmith, either. I've also seen people recommend a specific company in Ohio for this work. Maybe someone else will provide the name.
__________________
Will makes some excellent points and I agree with all of them. - Dean Romig 03-13-2013 |
||||||
03-03-2015, 01:28 PM | #4 | ||||||
|
No pitting in the bores. All pitting is on the exterior metal work. The barrels are bad.
Dennis |
||||||
03-06-2015, 02:22 PM | #5 | ||||||
|
You will probably have the cost of another 12 ga. repro. into the project before your satisfied. What can you tell us about the condition of the rest of the gun? 12ga. repro. barrels do come up for sale, but not very often.
|
||||||
The Following User Says Thank You to Chris Travinski For Your Post: |
03-06-2015, 05:22 PM | #6 | ||||||
|
The pitting is on the exterior of the barrels and any blued surfaces ie. trigger guard and butt plate. Frame is not pitted. Bores are not pitted. My gunsmith had one gun apart and there was no corrosion on the inside. He had that gun working in ten minutes.
Both guns are 28", straight/splinter, single trigger. Not sure what the choke measurements were but he said they had been opened to IC/M. His suggestion was to shoot them the way they were or sell them as parts. Dennis |
||||||
03-07-2015, 08:38 AM | #7 | ||||||
|
That's unfortunate, 28" 12 ga. Repros are somewhat uncommon. If it's 28" IC/Mod they could be steel shot specials, is there any prefix in the serial number or are they just 12-1XXX? It's hard to imagine how that happens, but if your not a gun person or just don't care....
|
||||||
|
|