![]() |
![]() |
![]() |
|||||||||||||||||||||||||||||||||||||||
|
![]() |
![]() |
![]() |
#3 | ||||||
|
![]()
There is some mention in The Parker Story about the 12-B and alot on the 12-A shotshells. The 12b seemed somewhat popular early on, but didn't seem to last.
Every 12-B Parker I have seen has been a back action lifter in the early days of production to the early 1870s. Sometimes the 12b will be confused with a 14 gauge. They are close but easy to see the difference when you have both guns together. I do a shoot Parker chambered in 12b and use a 12 gauge wad and RedDot powder in RMC brass shells I had made from original 12b shells I have. It is nice to take it out on occasion, serial# 029. The 12b just didn't last and the 12a became what we are familiar with as a 12ga today. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 2 Users Say Thank You to Jay Oliver For Your Post: |
![]() |
![]() |
![]() |
#4 | ||||||
|
![]()
I believe the stepped chamber without a forcing cone was designed and cut to receive the “B” or brass shell and the chamber cut with a forcing cone was designed for use with paper shells.
.
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#5 | ||||||
|
![]()
I have these eight Parker stamped brass shells which a chum gave to me, neatly fitted into this box that originally held screws. And yes, each is stamped with an "A"...
![]()
__________________
It ain't what you don't know that gets you into trouble. It's what you know for sure that just ain't so. - Mark Twain. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 5 Users Say Thank You to Phil Yearout For Your Post: |
![]() |
![]() |
![]() |
#6 | ||||||
|
![]()
Here are some original 12b's and my RMC copies...
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following 4 Users Say Thank You to Jay Oliver For Your Post: |
![]() |
![]() |
![]() |
#7 | ||||||
|
![]()
Dean mentioned the letter U on the water table of some lifters. What is its meaning?
Bob Jurewicz |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#8 | ||||||
|
![]()
I have always believed it represented Underlifter but there have been those who contend that is not its meaning… without having offered something different.
.
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Dean Romig For Your Post: |
![]() |
![]() |
![]() |
#9 | ||||||
|
![]()
I see the very early high-grade lifter that Josh has for sale on GI as an 11-gauge has a B stamped on the watertable. What would be the difference between the chamber dimensions of an 11-gauge paper shell and a 10B brass shell?
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Dave Noreen For Your Post: |
![]() |
|
|