|
08-13-2010, 03:51 PM | #3 | ||||||
|
I am not good at determining what is uncommon and not. But I would seem to think there are quit a few #3 frame lifter and top lever guns going around in 10 gauge.
A # 3 frame top lever or lifter 12 would seem to be a less than common variation. Mr. C, Check your Parker Pages from 2006 or 2005. There is a #3 frame 12 ga 32" lifter mentioned in the article about the Southern Side by Side from that year. Yours is only the second #3 frame 12ga hammer gun I have heard about. Last edited by John Truitt; 08-13-2010 at 04:11 PM.. |
||||||
08-13-2010, 11:43 PM | #4 | ||||||
|
The gun measures 1-3/16 between firing pins,barrel s are stamped 5lbs can not make out the oz. 30" barrels lug stamped #3, check hook, Top lever chambers 2-7/8" gun weighs 9lbs even. engraving is like a B can not take pictures my wife has camera at coast
|
||||||
08-13-2010, 11:46 PM | #5 | ||||||
|
Also the gun lettered as is, sent in 1885 toE.E. Meuqis and Company Kansas City Mo.
|
||||||
Three Frame 12ga Lifter |
08-14-2010, 06:02 PM | #6 | ||||||
|
Three Frame 12ga Lifter
The three frame 12 ga lifter gun is mine; 104043. It has 32 inch barrels "P" stamped on the water table and weighs 10 pounds. It is chambered 2 7/8 inches. I shot it at the Southern a few years ago, and occassionally shoot five stand with it. It id amazingly nimbe for its size.
Best, Austin |
||||||
08-14-2010, 08:34 PM | #7 | ||||||
|
Austin, Mine also has the P in a diamond stamped on the forend lug, also how much were the barrel weight before final finish on your gun? thanks Gary
|
||||||
Three Frame 12ga Lifter |
08-15-2010, 08:35 AM | #8 | ||||||
|
Three Frame 12ga Lifter
Gary; unstruck weight is stamped 5 12. No diamond around the P on this gun.
best, Austin |
||||||
|
|