|
03-06-2011, 07:40 AM | #3 | ||||||
|
I was asked a few questions via private messages that I think they are worth sharing.
I was also asked if Bachelder outsources the case hardening/coloring? Bachelder case hardens in house. He does it by batch of like guns from the same period. I know that he mixes the ingredients special for each gun and period. I just sent him a EH Parker after learning that he has a batch (about a dozen) of early Parker hammerless actions going to be case hardened in the near future. I was asked if Bachelder restocked this Super Fox? Bachelder restored the original wood by first using a heated acid solution to pull the oil from the stock. After that he was able to restore the original wood. Previously Brad did the same for an LC Smith 10 Gauge Grade 2 with chain Damascus barrels. Finally, I was asked about price and schedule? I think the price Brad Bachelder charged me for this restoration was very reasonable. The time required was also reasonable. Since I do not represent Brad please ask him about price and schedule. I think you will find him to be surprising reasonable for both. Most respectfully, Mark |
||||||
The Following 2 Users Say Thank You to Mark Ouellette For Your Post: |
03-06-2011, 02:47 PM | #4 | ||||||
|
Nice gun Mark!
Nice work Brad! |
||||||
The Following User Says Thank You to Pete Lester For Your Post: |
03-06-2011, 02:58 PM | #5 | ||||||
|
Please tell me how a "heated acid solution" wouldn't act on the wood fibres possibly even weakening them?
|
||||||
03-06-2011, 03:18 PM | #6 | ||||||
|
Dean,
I do not know the chemistry behind how heated acid draws oil from a stock but it does. So does unheated acetone and whiting compond. They just do not draw out as much oil. Heat and steam are used to cause the bonds between wood fibers to soften allowing them to realign under pressure. The bonds are reformed when they cool. This is how one, including me, can bend a 100 year old gun stock without breaking it. When I consider the above, plus that certain acids may destroy metal but not wood, I am happy to accept under the correct conditions, Brad is able to use heated acid to draw oil from a stock. Unlike bending a stock, this is something that I will not try at home Mark |
||||||
03-06-2011, 04:41 PM | #7 | ||||||
|
Dean,
If you looked at my 6 frame 10 at Easton last fall, it had the same treatment. Jeff |
||||||
03-06-2011, 06:25 PM | #8 | ||||||
|
Well, okay then - I guess if you guys say so...
I wonder what kind of acid and level of dilution (molar) ? |
||||||
03-06-2011, 08:41 PM | #9 | ||||||
|
Wonder what you have to avoid leaving a residual amount of acid in the stock and ending up with a problem similar to the Browning "Salt Wood" problem?
|
||||||
03-06-2011, 09:23 PM | #10 | ||||||
|
Fantastic !!
Looks like a great candidate to ride up front with me in the scull boat next fall. I won't forget my earplugs this time.... Kurt
__________________
Parker Shooter and Custom Game Call Maker Check out my website: http://www.densmorecustomcalls.com |
||||||
|
|