Meriden questions
Not sure that this exactly qualifies as a "fine double" but thought I'd be able to get some questions answered here. I have a Meriden 20ga that was made about 1916 or so. I bought it over 20 years ago from a guy who was using it as a wall hanger but I figured that for $6 I couldn't go wrong even if I just hung it up. He had painted all the metal with black epoxy paint then baked it in the oven. I'm in the process of stripping the paint off. I've had it looked at and was told that it could be made serviceable again. Main issues as it stands are some missing parts and the stock has some missing wood at the receiver. The barrels seat well and are not too thin but have a couple small dings which I was told could be easily removed. I do some woodworking and have picked up a free walnut blank so I'm slowly working at making a replacement stock. We'll see how this one goes but at the worst I'm out some time. I was looking on the Numrich site and I can get most of the parts I need. Parts I know I need are cocking rods, front and rear firing pins, firing pin seat (not available), misc. screws (most of which are available), and a top lever spring. Here's some pictures of the gun disassembled. I'll most likely put them up in a couple posts along with some questions I have.
Thanks,
Kirk
|