Visit Brian Dudley's homepage! | |
03-28-2021, 10:12 PM | #3 | ||||||
|
Thanks for the info Sir.
|
||||||
03-31-2021, 01:20 PM | #4 | ||||||
|
If you must release them and do so without using snap caps I would suggest when you open the gun that you place your thumb or finger against the ejector kicker to prevent it from slamming into the ejector stop plate. While dry firing or releasing the hammers will not cause any damage allowing the kickers to slam into the ejector stop plate without the aid of a snap cap to reduce the impact may very well cause you some grief.....
|
||||||
The Following 3 Users Say Thank You to Randy G Roberts For Your Post: |
03-31-2021, 01:59 PM | #5 | ||||||
|
If something is going to break, it'll be an ejector.
|
||||||
The Following User Says Thank You to Mike Koneski For Your Post: |
|
|