|
04-26-2021, 07:07 PM | #3 | ||||||
|
Federal would have to tell us the PSI for the shorty shell. They only have to make them to meet SAAMI specs. RST gladly provides their PSI for their loads. Good luck getting it from Federal.
Ken |
||||||
04-26-2021, 07:23 PM | #4 | ||||||
|
Do not have any experience with those but if they are marketed to function in auto loaders i would not believe them to be ''low pressure''unless the manufacturer will give you the established pressure information.
|
||||||
04-26-2021, 07:47 PM | #5 | ||||||
|
Can someone explain what "low pressure" is? Below a certain PSI? I have not seen pressures on RST I think you have to ask them unless I missed it.
__________________
Nothing ruins your Friday like finding out it's only Tuesday |
||||||
04-26-2021, 07:58 PM | #6 | ||||||
|
As the posted sheet above shows in the upper left hand corner in small print PSI is 11,500.
I would say that is high compared to RST loads but .....
__________________
Bruce A. Hering Program Coordinator/Lead Instructor (retired) Shotgun Team Coach, NSCA Level III Instructor Southeastern Illinois College AMM 761 |
||||||
04-26-2021, 10:02 PM | #7 | |||||||
|
Quote:
I emailed RST in Feb of this year about their 2" loads. Chris sent me a pdf with most of the 2.5" loads in 12, 16, 20, and 28 gauge loads along with the 2" 12 loads. The highest 12 gauge psi listed in 6300. Their 2" loads range from 4800 to 6200 psi. Bruce, The sheet Milton posted looks like the SAAMI spec for the shell and not necessarily the Federal shell. Ken Last edited by Ken Hill; 04-26-2021 at 10:35 PM.. Reason: Added 2" psi |
|||||||
The Following User Says Thank You to Ken Hill For Your Post: |
04-26-2021, 11:20 PM | #8 | |||||||
|
Quote:
|
|||||||
04-26-2021, 11:44 PM | #9 | |||||||
|
Quote:
__________________
Bruce A. Hering Program Coordinator/Lead Instructor (retired) Shotgun Team Coach, NSCA Level III Instructor Southeastern Illinois College AMM 761 |
|||||||
The Following 2 Users Say Thank You to Bruce Hering For Your Post: |
04-27-2021, 06:16 AM | #10 | ||||||
|
Wow that’s low. Thanks Ken.
__________________
Nothing ruins your Friday like finding out it's only Tuesday |
||||||
|
|