|
12-31-2022, 08:39 AM | #3 | ||||||
|
Took an old 1 x 2 ,drilled holes in the thin side, fitted dowels in the holes, and wrote the bushing numbers on the long side
__________________
"Striving to become the man my dog thinks I am" |
||||||
12-31-2022, 08:47 AM | #4 | ||||||
|
I bought the MEC bushing holders (3 of them) and hang my bushings on them. I also fill the bushing number engravings on the bushings with a red "paste" so I can see the bushing sizes easily, especially through the window in the press. Beats having to pull the bushing to check what size you're using.
|
||||||
The Following User Says Thank You to Mike Koneski For Your Post: |
12-31-2022, 09:01 AM | #5 | ||||||
|
I write the bushing size in a piece of tape, and stick it on the front of the powder chamber
__________________
"Striving to become the man my dog thinks I am" |
||||||
12-31-2022, 09:23 AM | #6 | ||||||
|
When I reloaded I put all my bushings (12 of them) on a single hardwood dowel with small document clips at either end. I wrote the bushing # on the side of each with bright marker for easy ID on the rod. Kept all in one place easily visible and stored upright and out of the way like a cleaning rod on a rack.
|
||||||
12-31-2022, 09:24 AM | #7 | ||||||
|
I don't see any comments about the Mec adjustable bars? Do you all use that many different bushings to save time in adjustments?
|
||||||
12-31-2022, 02:10 PM | #8 | ||||||
|
I have the adjustable charge bar and don't mess with any bushings. I love it. Well worth the money in my opinion.
__________________
"Where would a minister be without the help of sin, or the dry without alcohol?" Gene Hill Shotgunner's Notebook "May the honkers fly low and slow." Douglas Bandemer |
||||||
12-31-2022, 03:33 PM | #9 | ||||||
|
What Matt said.
|
||||||
12-31-2022, 03:42 PM | #10 | ||||||
|
Sewing machine thread rack. Works great. Adjustable bar works great if you always go from small to larger cavity. It takes out the slack, then lock it down.
|
||||||
Tags |
bushings, mec, storage |
|
|