|
 |
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
 |
01-10-2021, 05:20 PM
|
#3 | ||||||
|
May have been done in an attempt to tighten up the action. Notice the peening marks above the one - sometimes done to displace metal for the same purpose.
|
||||||
|
|
||||||
 |
 |
 |
| The Following User Says Thank You to Kevin McCormack For Your Post: |
|
|
|
01-10-2021, 06:40 PM
|
#4 | ||||||
|
I thought of that also Kevin, but it just seemed like such a half-azzed method and the screw heads are countersunk a bit and certainly wouldn't tighten anything up.
|
||||||
|
|
|
||||||
|
|
|
|
|
|
01-10-2021, 06:51 PM
|
#5 | ||||||
|
Can you turn the screws? This is a wild guess....but maybe to put some tension on the shells so when the action is open they don't fall out? You might have to set them differently for different brands of shells.
I recently saw on one of the bird hunting shows that CZ magnetizes their chambers now so shells don't fall out when the action is open. Again just a guess... |
||||||
|
|
|
||||||
|
|
|
| The Following 4 Users Say Thank You to Jay Oliver For Your Post: |
|
|
|
01-10-2021, 07:15 PM
|
#6 | ||||||
|
Jay, I think you may have something there. And the rounded tips of the screws seem to support your theory.
.
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
|
|
|
||||||
|
|
|
|
|
|
01-10-2021, 07:20 PM
|
#7 | ||||||
|
It would be a handy feature for us fellas that like to carry our Hammer Guns Cocked and Open ! Just Saying !
|
||||||
|
|
|
||||||
|
|
|
| The Following User Says Thank You to Russ Jackson For Your Post: |
|
|
|
01-10-2021, 07:29 PM
|
#8 | |||||||
|
Quote:
.
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
|||||||
|
|
|
|||||||
|
|
|
| The Following 2 Users Say Thank You to Dean Romig For Your Post: |
|
|
|
01-10-2021, 09:18 PM
|
#9 | ||||||
|
I like the idea of that feature as well and it would be a real benefit on a hammer gun. Or a a hammerless gun without a safety...
|
||||||
|
|
|
||||||
|
|
|
|
|
|
01-10-2021, 09:42 PM
|
#10 | ||||||
|
Unlikely, but maybe set screws to hold chamber adaptors in place?
|
||||||
|
|
|
||||||
|
|
|
| The Following 6 Users Say Thank You to Bob Brown For Your Post: |
 |
|
|
Linear Mode
