![]() |
![]() |
![]() |
|||||||||||||||||||||||||||||||||||||
|
![]() |
![]() |
![]() |
#3 | ||||||
|
![]()
Welcome Marty!
97031 is not in TPS or the Ser. & ID Book. 97170 was the third 28 gauge of any grade ever made by Parker Bros. Forget about just 1900. It will likely have been built on a 0-Frame and is listed in TPS as a TI3 straight-grip with 26" barrels. Please show us some pictures of your VH 28 ga. Parker. If it is in good original condition it is a very valuable Parker. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#4 | ||||||
|
![]()
Thank you for your reply; it is a 26" barrel and it is on an O-frame. The gun was re-done years ago in Duluth, MN.....at the present time I have the gun in two places. It is getting restocked and I am also having the barrels looked at to see if I can get the pitting off of the rib. Unfortunately it does not look I will be able to get the pitting removed to get it back to looking original. Any ideas on where I may be able to find a used rib for the barrels? When the gun is back here in MN, I will post pictures. Again, thank you for your reply.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
|