Quote:
Originally Posted by Cory Rams
I haven’t ran into a lot of BP load data anywhere. I think track of the wolf and Ballistic products were the only places I’ve had luck for 10 gauge loads. The data I found works up to a square load of 4.5 drams of FG and 1 5/8oz of shot. I tried it with #6 BPI nickel plated shot and in my gun I had a better pattern dropping down from 4.5 drams of FG, 116 grains of FG powder to 100 grains. I can tell you there was also noticeable less recoil with the 16 grain drop as well. Shot a turkey with the load last year at 25 yards with the 100 grain FG load and 1 5/8oz #6’s. It dropped the bird in its tracks.
|
A few of test targets with the 1 5/8oz #6 load. My barrels must not have tight chokes. The left barrel is the clear winner for longer range shooting.
Left and right barrels with the same load at 25 yards.
The right barrel is definitely a close range spreader.
I also tried factory loaded 1 1/4oz RST #5 and #6. The best group I had was with number 6’s at 25 yards. I had half the number count of hits VS the above load and 40 yards was not obtainable for shooting a turkey needless to say with the RST factory loads in my gun.
And the outcome of the first time out in the woods with the gun and load…