Mylar wraps on the way as are some BPD-10 wads. I'm thinking to make a fixture to cut the wads down in length to duplicate the shot cup on an SP-10. Plan is to use a gas seal over the powder, a combination of fiber wads for correct height, then the cut down plastic shot cup. Kind of a pain but I don't see any 10 ga. wads in our near future. I shoot a few dozens of short 10s at a time not hundreds and at some point I'm going to run out of SP-10s. I'm starting on this now for future use. If we get some 10 ga. wads "back on the shelf" at some point, GREAT. If not I'll have some workable alternatives that don't leave a ton of shot glued to the insides of my barrels and the additional cleaning chores.
|