Quote:
Originally Posted by William Davis
Interesting post, photos add a lot. Do you use the Arbor press in the photo. How about lube. Any on the base when sizing ?
Willam
|
I use imperial sizing die wax , however I have tested different lubes/oil to see what works. On the Winchester hulls you can size them with just a spray of Rem oil the brass, the Win hulls brass is very workable. Yes I use the one ton arbor press from harbor freight . The Winchester clear hulls read .945" on the brass band before and after resizing .925" . I then turn the die upside down and insert a 3/4" diameter wood dowel and use the arbor press to push it back out doesnt take much effort .
I found a hull trimmer I plan on buying that looks like it could be easily modified to work on 8 gauge hulls . The hull sits on a roller and you just spin it around I think I could easily make a roller for the 8 gauge hulls.