View Single Post
Unread 10-23-2022, 02:59 PM   #4
Member
Drew Hause
Forum Associate
 
Drew Hause's Avatar

Member Info
 
Join Date: Nov 2008
Posts: 2,084
Thanks: 323
Thanked 3,762 Times in 1,246 Posts

Default

In 1865, Ethan Allen received Patent #48249, for twisting, winding, and welding damascus shotgun barrels. One of the witnesses is Sullivan Forehand. One year later, Ethan received another patent for soldering the tubes together through internal flaming. Sullivan Forehand was a witness again.
Ethan Allen resided in Worcester, Mass. at the time of both patents.
“I take a number of sheets of metal, of hot iron and steel, and lay them up alternately first a sheet or bar of one and then a sheet or bar of the other and when I have a sufficient number together they are subjected to a Welding-heat, and thereby welded solidly together. I then roll this down into a small bar and again heat it, and put it into a machine and twist it, after which it is again rolled flat or partially flattened. I then cut this flattened bar in two lengthwise through the center, and put these together, keeping the outside edges together. I then wind them spirally (after being heated) around a round rod, keeping what was the center of the bar before it was last cut in two on the outside, then weld it firmly together in the ordinary manner, thus producing a figure on the exterior of the barrel corresponding to the twist of the inside of the bar.”
“The figure of the barrel can be varied by the number and thickness of the layers and the twist given the bar, so almost an endless variety of figures can be produced, and make a very strong as well as a very handsome barrel.”

Allen produced over 600 high quality breech-loading shotguns of unique design in Springfield, Mass. between 1867 and his death in 1871.

c. 1870 Ethan Allen “Best Laminated”



“Fine Laminated”



In 1869, another patent was issued to Selah Hiler of Harlem NY for improvement in the manufacture of gun barrels in which he states that “successive rolling operations...(is the usual)...manufacturing process.”

More here on U.S. produced pattern welded tubes, including Dan Wesson and Parker Bros.
https://docs.google.com/document/d/1...4S6OIN1bA/edit

Last edited by Drew Hause; 10-23-2022 at 03:14 PM..
Drew Hause is offline   Reply With Quote
The Following 7 Users Say Thank You to Drew Hause For Your Post:
Visit Drew Hause's homepage!