View Single Post
Unread 06-12-2022, 10:11 PM   #5
Member
edgarspencer
PGCA Member
 
edgarspencer's Avatar

Member Info
 
Join Date: Sep 2011
Posts: 6,059
Thanks: 2,905
Thanked 11,409 Times in 3,075 Posts

Default

Harold, I use a 600jr for 28ga, with a short kit for 2 1/2". My favorite wad has been out of stock forever, so I'm using the SP28-II and had to ream the 3/4oz bar in order to get it to drop a true 3/4oz. I get excellent crimps, but all my hulls (NPE) were trimmed from 2 3/4" hulls so the skiving is gone, and I attribute the good crimps to the thicker wall of the hull. I have a super sizer for 28ga because one of my VH28 gun has a slightly larger chamber, and sizing with the 600jr seems to shave brass on hulls shot thru that gun. My other gun does not have an oversized chamber, but I can't segregate the hulls, so all of them go thru the super sizer.
Want to trade some of that 20/28 for gasoline?
edgarspencer is offline   Reply With Quote
The Following 2 Users Say Thank You to edgarspencer For Your Post: