Thread
:
Need advice 16 gauge RST
View Single Post
01-24-2023, 08:50 AM
#
4
Member
Andrew Frank
PGCA Member
Member Info
Join Date: Mar 2021
Posts: 40
Thanks: 1
Thanked 59 Times in 18 Posts
So, if you are using a progressive I would check the final crimp die as it might be set too low. If you’re using a 600 jr, it’s going to be your can adjustment. You may have to play with pre crimp after. MEC has a good video on you tube.
The Following User Says Thank You to AndrewFrank For Your Post:
Russell E. Cleary