Rick is right Brian. Sometimes a light forward tap with a small rubber mallot on back of the trigger guard will free it. Push the trigger guard forward while lifting it out. After removing the plates, drop the push button under lifter. There's a small screw behind the left plate to free the lifter from the locking bolt. Remove the top tang bolt, then the trigger plate. I figured disassembly out on my own, but I've taken alot of doubles apart prior. Take your time. As Brian Dudley said, you could do harm, or cause damage if not familiar with this gun. There may even be a member who lives close that would be glad to walk you through it! Lots of help here, and some great folks. Im sure everyone means well . These guns are easy to work on after you've done a couple.
Chris, AZ
|