[OH Osthaus]

Rubber end? a recoil pad ? Does the other have a hard buttplate with a dogs head on it?

from the bottom picture - I take it the closest one is the 12 gauge - I see some condition issues in the stock there. Looks like a chip missing along the top tang and some deep dings in the wood. If that is #92688 do the barrels measure 30" as they should, and is that the one missing the bead on the top front of the barrels?

if the far gun is a 16, from what I can see it looks to be in nice shape, how long are the barrels on that one?

the two other questions for conditon for both is the inside of the barrels, from the little I can see they may need a good cleaning, then check for pits inside.

also, there is a number on the barrel lug - the part that raises up on the underside of the barrels - that will tell us the frame size, and other marking under the barrels on the flat suface help with infomation such as barrel weight.

a simple test for the action being tight ( call on face) is to take off JUST the foreend ( pull down on the latch on the under side and it pulls away at an angle - reverse the procedure to put it back on) leave the barrels locked in place and hold the gun upright by the wrist and give it a shake, you don't need be rough at it, if you feel or hear a rattle it may need some attention to bring it back to shooting conditon.

pictures of the rest of the guns would help.