Quote:
Originally Posted by Steve McCarty
You have, of course, give voice to my delima. Except for some slight rust feathering on some of the receiver the gun is new. While it looks like it came out of the factory last week (except for the slight rust spots) it is 81 years old!
Bore was dirty, I scrubbed it out last night and she came up absolutely new. No wear on the lower tang. So the gun was in a closet somewhere where it survived for a generation or two.
Last night I had made my decision to have it threaded, and now I've changed it again. I'll get the spreaders and see how she shoots at skeet. I can drop a spreader into the chamber and slide a normal shell up the magazine and have a non-selecting double barrel, right?
These old Model 11's are almost considered as junk in the collector world. I think they are much better shotguns than that. They work like a Browning, but heft a little differently and are a slightly different shape.
Also the bead is mounted on a little pedistal to compensate for the thickness of the receiver. If held so the pedistal can be seen the gun will shoot a little high so you can get some float at the trap range, which I like and it compensates for the lower comb. I think - I have yet to shoot the gun. I got it just a few days ago.
|
Rich has a good idea with the spreaders.....at least give it a try. You have nothing to lose. I had a choke opened on a shotgun once and it still paterned too tight for my liking. Spreaders solved the problem. If you are not happy, you can always go with screw ins or have it opened.
Besides, it is the journey, not necessarily the destination, that is the most fun. A reloading friend or a good reloading supply store can be most helpful for spreader information.
Best Fishes,
Steve Kleist Ely, MN