Thread: 10 ga loads
View Single Post
Unread 04-25-2012, 10:43 PM   #2
Member
J. A. EARLY
PGCA Member
 
Jerry Harlow's Avatar

Member Info
 
Join Date: Nov 2010
Posts: 2,129
Thanks: 4,639
Thanked 3,050 Times in 985 Posts

Default

Quote:
Originally Posted by charlie cleveland View Post
j a thats a mighty low presure loads...do you have any problems with bloopers....do they do well on cold days....what type of crimp do you use... do they make a good loud noise... charlie
Charlie,

A 24 gram load is actually very slightly less than 7/8 ounce (.846 compared to .875). It is 24 grams of shot, 23.5 grains of SR7625, Win 209, cb1100-12 wad in a WWAA case. 3500 p.s.i., 1150 fps.

With a Remington 209P primer, they are 3000 p.s.i.!

8 point crimp.

I imagine since it is pushing such a light load there are no bloopers as with heavy charges. I have not had a problem but never shot them when it was that cold. I made these up for a GH Damascus with a repaired dent which shows .022 thick, but several inches before the choke starts. Can't get much lower pressure than these.
Jerry Harlow is offline   Reply With Quote