Quote:
Originally Posted by Paul Harm
Pete, just my personal preference, 1265fps is unnecessary. Maybe that load is necessary for a clean burn. I'd try about 1.5 to 2 grains less - you'd have a little less FPS but would also lower the pressure. A lower velocity would mean less recoil. Shot that starts out faster slows down quicker so at any distance you haven't really gained a whole lot. A lower pressure also means less shot defromation. That equals better patterns. I have a IMR manual in front of me -in one load they have from 14.5 to 18.5 grs to give 1150 to 1325 FPS. Pressures go from 5,700 to 8,300. Good luck - Paul
|
I agree with you Paul 100% on the speed being unneeded. I already went ahead and loaded some shells with 29 gr of Unique in the Federal hull with Fio primer. Had a good report, recoil felt normal, looked to be burning clean and killed a couple of crows.
What load/gauge and powder are you looking at in regard to that 14.5 to 18.5grains?