Quote:
Originally Posted by Bruce Day
I have several Parkers that have 2 1/2" nominal length chambers and have shot 1 oz Rem Gun Club shells through them. All of mine in that category are damascus or Bernard guns. I have had trouble with the steel base of the Feds expanding and sticking in the chamber after reloading several times. This is despite re sizing in the collet of a MEC 650. I have not experienced that with Rems. My favorite hulls to reload are the Rem STS hulls.
|
Bruce your problem with reloaded shells sticking is because the MEC 650 does not have a resizing collet. Your reloads were/are not resized using a 650, you have to have a stand alone MEC Super Sizer, or older MEC case conditioner or resize them on separate 600JR or the like first.
Brian here is the link to a video I put up on Youtube regarding the reloading for 2 7/8" 10ga. You can see a homemade shell trimmer in action.
http://www.youtube.com/watch?v=owXs4Eg__BE
I also want to say running off a bit on any subject can bring up other interesting and sometimes important points of view or information. Nobody is forced to keep reading. I see no harm no foul. Carry on.