roundsworth this is the load i used.... a 00 buck pellet weighs 53.8 grains so this times 12 =653.6 = 1.49 ounce or 1 1/2 ounce... all info took from factory sorces...in fact i this was posted on this forem sometime back...part of these loads are took from mr bells pages of short ten loads...the other load is from a differant source it is a black powder load and i have not tried it yet... no 1 load mr bells.. no. 106 hull fed. primer win 209 bluedot powder 39 grains 1 1/2 bismuth x10x2 1/4 inch filler mr buffer 24 psb roll crimp pressure7100 psi velocity 1141 ..... i used lead instead of bismouth 1 1/2 ounce of 00 buck equal 12 pellets... the other load was black powder for the 10 gauge guns this is the way its stated... DEER cylinder bore only.... 5 drams 3 layer buckshot... both loads are for the 10 gauge the factory tends to lean to open bore guns... ive used this load of mr bells in my p grade hammerless parker....it patters very well at40 steps in a 30 inch circle... i will use this same load again trying to get a deer with the old parker... im not to good at posting things so maybe yall can make heads and tales of this post... charlie
|