Thread: Removing blue
View Single Post
removing bluing
Unread 06-08-2011, 09:00 PM   #8
Member
Parker Bachelder (Brad's Profile)
PGCA Member

Member Info
 
Join Date: Jun 2009
Posts: 296
Thanks: 177
Thanked 1,928 Times in 203 Posts

Default removing bluing

Jack
The easiest way that I have found is to dip the parts. We use a solution of 15 % baume Phosphoric acid, cut with 25 % distilled water. Dip for ten minutes, rinse for 3 minutes in hot water. Place the parts in a bath of diluted baking soda, 2 cups to one gallon, for 20 minutes, rinse in cool water, dry parts with air. The parts are totally clean, so, polish and hold right away. Hold is available from Brownells. After stripping the parts will be a dull grey.

Brad
Brad Bachelder is offline   Reply With Quote
The Following 3 Users Say Thank You to Brad Bachelder For Your Post:
Visit Brad Bachelder's homepage!