[Gerald McPherson]

Need some info about the screw heads on the side of the receiver. The larger one is the hammer screw and the smaller one with it is there to secure the hammer screw. Is this correct? I have one that someone has put the small screw in first and then the larger one is on top of the smaller one. If I backed the hammer screw out 3/4 turn then I can remove the smaller screw and then tighten the hammer screw to the correct position and put the smaller screw back in its correct position. I have not been inside a Parker farther than to remove the stock so not sure what holds what and don't want to mess anything up. Thanks for your advice. Gerald