Quote:
Originally Posted by Bruce Day
Soak in acetone until all the gunk is gone, then Superglue the interior surfaces. The older epoxies added thickness to already tight fits within the head.
|
Bruce- I have a chance to buy a 12 Trojan project gun- the stock head has been pinned, the LOP with a crappy old Red head pad is 13.5""- all that is fixable as a project- BUT- the previous owned superglued or epoxied the trigger guard bow into the stock channel, it's in their tighter than Dick's Hatband- you can even see the "gunk" on each edge of the guard bow "tail section"-- would acetone remove that and allow me to remove the guard bow- the front of same partially covers the rearmost of the three trigger plate screws--Thanks!!
