Nope never used either originally I used a jig I made from a piece of oak and cut them on a bandsaw . It works well enough and quick although they have a bit of a frayed look . Two or three years ago a friend made me one that works excellently with the chedderite hulls . The hull in the picture was cut earlier so there was no trimmed piece to show and had no uncut hulls . FWIW I also tried this cutter on new REM hulls and it worked but just a little more effort involved as the REM hulls are a touch thicker .
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines !
|