Here's the one off the Hodgdon site that I've been using and found more than adequate for my needs.
2 3/4" Winchester compression formed hulls "Either old style or HS hulls" Just use the specific wad for the HS hulls. The older CF hulls use a different WAA wad, but the loading is the same.
Win 209 primer, WAA28HS wad, 14.6 grs-longshot, 9800 PSI, 1200FPS
IMO: 9800psi in 28ga is a pretty low-pressure load! Overall, I like the load, and it does everything I was expecting of it. It is a tad on the dirty side but that's par for the course in these times of having to find loads for the powders that are currently available.
Disclaimer: This isn't my recipe; it's a published load taken off of the Hodgdon powder web site.
|