Quote:
Originally Posted by Pete Lester
I have gone through about a pound of it recently. It's a very fine grain powder and I thought there would be some leakage on a MEC single stage. With the MEC brass washer under the rubber grommet and the powder bottle screwed on very tight I haven't experienced much leakage at all. For 7/8 12ga loads the Claybuster grey wad gives good crimps in the Winchester AAHS hull. In the older AA Compression Formed hulls I have to use the Claybuster 3/4 ounce wad for a proper crimp. I am using a #16 MEC bushing and it's throwing 14.7 grains of PP.
|
Thanks for the information on the bushing you're using. I recently bought an 8 pounder of perfect pattern and plan on switching over to it, but then I ran into an issue where I couldn't find a bushing chart for it.
I really appreciate you posting the bushing size and now I have a starting point.
Does anyone have a bushing chart for perfect pattern?