I’ve gotten several single cavity no sprue cutter molds from Tanner Molds in the UK usually about $40 each . And they’ve worked pretty well in the 8 gauge and my 10 gauge . However I do not get molds to fit the nominal bore diameter I get them about 3/1000’s less then diameter at the muzzle and then I build up a bit with masking tape to fit . FWIW you might look on EBay few years back I got a copy of the Lyman Sabot Slug mold but for the 10 gauge . But it was made in Russia or the Ukraine I forget which so that might not be an option anylonger . I actually got them for 10-16 and 28 . My 12 is an NOE version and my 20 is an actual Lyman . But they all look like big air rifle pellets .
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines !
|