Quote:
Originally Posted by Craig Larter
One think I have learned is the material used to take up stack height makes a difference in pressure. In one load I used four 1/8" 10ga nitro cards as filler, in another, the same except I used a 1/2" fiber wad. The nitro card load averaged 8200PSI, the fiber wad load average 6833psi. Velocities were similar at 1130fps. It must be that the fiber wad is softer and compresses on ignition.
|
Red beans ! Red beans are the ticket 
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines !
|